/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  5.x                                   |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       dictionary;
    object      meshQualityDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

//- Maximum non-orthogonality allowed. Set to 180 to disable.
maxNonOrtho 60;

//- Max skewness allowed. Set to <0 to disable.
maxBoundarySkewness 4;	//Original 20 for better quality 4
maxInternalSkewness 4;

//  Set to 180 to disable.
maxConcave 80;

//  Set to very negative number (e.g. -1E30) to disable.
minVol 1e-13;

//- Minimum quality of the tet formed by the face-centre
//  and variable base point minimum decomposition triangles and
//  the cell centre. Set to very negative number (e.g. -1E30) to
//  disable.
//     <0 = inside out tet,
//      0 = flat tet
//      1 = regular tet
//  1e-15 (small positive) to enable tracking
// -1e+30 (large negative) for best layer insertion
//minTetQuality 1e-15;
minTetQuality -1e+30;

//- Minimum face area. Set to <0 to disable.
minArea -1;

minTwist 0.02;

minDeterminant 0.001;

minFaceWeight 0.05;
//minFaceWeight 0.02;

minVolRatio 0.01;

minTriangleTwist -1;

//minVolCollapseRatio 0.1;

// ************************************************************************* //
